#1 Powder Coating Stripper for Powder Coating Removal from Aluminum.

Powder Coating Stripper Demonstration Video

 Green Stripping Solution Concentrate – MILES #8641 

________________________________________________________________

Powder Coating Removal: Green Coating Removal Solutions  

Green Paint- Stripping Solutions: Multi-Metal Safe

T   E   C   H   N   I   C   A   L        D   A   T   A 

DESCRIPTION: MILES #8641

MILES #8641 is an eco-friendly: green, multi-metal safe concentrated paint stripping solution formulated to (use with up to 50% water) to de-laminate cured coatings including: powder coating, e-coating and wet-applied cured coatings from aluminum, zinc, magnesium, brass, stainless steel and steel substrates.  #8641 can be used to clean racks daily and recycle paint rework.

APPLICATION:

MILES #8641 Utilize an immersion tank with lid, polypropylene-evaporation inhibitor-floats, ventilation and a mixer. Charge and maintain (replenish solution-loss) with 50% conc. #8641 and 50% water. Heat to 185F., immerse parts for 30-60 minutes or until coating is completely delaminated. Pressure-rinse parts with water and dry for reprocess. Use 5% of #8644 by tank volume, as required to maintain pH below 4.0, to maintain optimum stripping performance.

Place_Secure_Order_Here

We accept:

T   E   C   H   N   I   C   A   L        D   A   T   A 

DESCRIPTION: MILES#8612

MILES#8612  ECO-POWDER STRIP-RTU is a ready to use (add no-water), eco-friendly: green, multi-metal safe paint strip solution formulated to dissolve cured coatings including: powder coating, (e-coating-only when heated) and wet-applied cured coatings from aluminum, zinc, magnesium, brass, stainless steel and steel substrates. Used in conjunction with #8635 Evaporation Inhibitor at 5% concentration.  

APPLICATION:

MILES#8612  ECO-POWDER STRIP-RTU is a unique formula that is used as received with no water dilution, at temperatures of 165F to 185F. Immerse rework parts in an immersion strip tank with a lid, ventilation and a mixer, for 30 to 60 minutes. May be used at Room Temperature for TGIC Powder Coating Removal overnight. Utilize-polypropylene-evaporation inhibitor-floats to reduce evaporation and replenishment requirements. Rinse with warm water and reprocess through Paint. Use with MILES#8635 Evaporation Inhibitor at 5% concentration. Accelerate Powder Coating Removal with 5% adds of MILES #8605 as required to maintain pH between 11.5-12.5 

Place_Secure_Order_Here

We accept:

Additional offerings: Aluminum Paint Strippers, Paint Removers, Powder 

Paint Removal Products, Paint Stripping Service/Coating Removal Service.

Contact us for your specific paint stripper/paint remover product/powder coating stripper requirements or A Free  Paint Removal & Paint Stripping Service/Coatings Removal  Quote and  for Paint Stripping Recommendation:  

Restore, Recycle & Reclaim Costly Paint Rework with MILES Chemical Paint Strip Solutions, Powder Coating Strippers, Remove E-coat, Paint Stripper for Stripping Aluminum Galvanized Steel non-ferrous & polypropylene and nylon plastics, Paint Stripping Products and more... 

Find Custom Coaters: Powder Coaters: Paint Finishers: Metal Finishers: Finishing Equipment: Finishing Suppliers: Finishing Events and Powder Coating Online Resources Here: